Featured News - Current News - Archived News - News Categories

MadeToAid, a partnership between UB and Cannon Design, has distributed over 2,000 fabric face masks. (Photo courtesy of the University at Buffalo)
MadeToAid, a partnership between UB and Cannon Design, has distributed over 2,000 fabric face masks. (Photo courtesy of the University at Buffalo)

UB, Cannon Design work to improve DIY fabric mask production

Submitted

Wed, Jun 17th 2020 03:50 pm

By the University at Buffalo

As the novel coronavirus spread across the globe, so too did a variety of do-it-yourself face coverings. However, there can be some hidden dangers with DIY personal protective equipment.

A University at Buffalo partnership with local industry has engineered a DIY fabric mask that is not only a potentially high-performing alternative to industrial solutions like the N95 mask, but is affordable and scalable. Called MadeToAid, the fabrication and distribution effort is helping to close the PPE need gap, as well as the product quality gap, by bringing together area designers, manufacturers, UB faculty and the DIY community.

The cotton masks are assembled from a “pattern-less pattern” that allows sewists to fold material “like origami” without printing out the design first. The elastics are attached to an adjustable clip on each side to help improve the fit and streamline production.

UB’s role has included research on rapid usability testing and application of existing scholarship on effective filtration fabrics. Researchers in the School of Architecture and Planning’s Fabrication Workshop assisted in the design and fabrication of the clip, creating a laser-cut prototype that takes only seconds to produce, compared to two hours for an initial 3-D-printed model.

Korydon Smith, professor and chair of architecture in UB’s School of Architecture and Planning and co-director of UB’s Community for Global Health Equity, has been leading the university effort. Smith discusses the project in the Q&A below.

Q: You conducted some research on rapid usability testing. What did your review uncover, and how does it relate to PPE production?

A: Rapid usability testing can be particularly useful in emergency management, when time and resources are constrained but feedback from those most impacted by a crisis is crucial. It is a means of gathering user input in a quick and cost-effective manner while retaining reliability.

Rapid usability testing has been utilized across a number of sectors ─ health care, product design, information systems and architectural design. Faculty at the University at Buffalo affiliated with the IDEA Center – doctors James Lenker and Victor Paquet – worked with colleagues in 2011 to develop a 12-item tool for Rapid Assessment of Product Usability and Universal Design (RAPUUD).

The MadeToAid collaboration applied these lessons to understanding the comfort, fit and performance of locally made fabric masks.

Q: Who is assisting in this effort?

A: Our collaboration uniquely stitches together textile artists and craftspeople, university scientists and fabrication experts, and local manufacturers like Rigidized Metals.

One of our alums, Michael Tunkey, an architect at Cannon Design with expertise in health care facilities, has truly been a community organizer, building a coalition of sewers and a means of getting masks to health providers who need them most.

As well, the fabrication team in the School of Architecture and Planning ─ Lindsay Romano, Daniel Vrana and Randy Fernando ─ really advanced the design of reusable clips for the masks. Equally exciting, we’re actively seeking funding, through grants and the guidance of local entrepreneurs like Frits Abell.

The tandem goals are to meet the need for protective equipment, while expanding employment opportunities for underserved communities in Buffalo, exemplified in the work of Stitch Buffalo.

Q: What are some of the dangers of DIY masks, and how does MadeToAid address these issues?

A: Many masks provide little to no protective quality and may, in fact, give a false sense of security, leading people to take risks that further expose them to infection. Likewise, poorly fitting masks can lead the wearer to constantly adjust them, meaning that their hands are coming into contact with their faces more frequently. Even cotton masks, though recommended by the CDC and others, provide only minimal protection.

Researchers in materials science and biomedical engineering, doctors Prathima Nalam and Anirban Dutta, respectively, have uncovered techniques for using common fabrics and other readily available products to improve filtration effectiveness ─ approaching the N95 in some cases.

An example is using two layers of nylon, inserted in cotton masks, and the science of “tribology,” or static electricity, to capture microscopic particulates and more than double the performance of the cotton mask.

Q: How is MadeToAid increasing, and speeding up, production of masks?

A: The arts are an important sector of the economy, but not often seen as a critical element of emergency management. This project, however, leverages the creativity of the textile arts, architecture, product design and materials science to address urgent needs in fighting the coronavirus, while providing innovative employment opportunities for underserved populations.

The goal is to advance the artistic and protective design of fabric masks, thereby providing a market advantage to local businesses. With support for workforce training, the goal is to scale up production and expand distribution.

Q: How many masks has MadeToAid delivered thus far?

A: To date, MadeToAid has produced and delivered almost 2,000 masks, valued at around $24,000, to three local community service organizations and to Veterans Health Administration hospitals in Buffalo and New Jersey.

Donations and profits from mask orders go to Stitch Buffalo, helping fund the incomes of refugee sewists re-settled in Buffalo from around the world. Stitch artisans hold weekly sewing drives to make the masks, as well as their own creations.

comments powered by Disqus

Hometown News

View All News